Samsung CL21A11MQ Owner's Instructions Manual

Also see for CL-21K5MQ: Owner's instructions Instrucciones del usuario

Contents

CHAPTER FOUR: SPECIAL FEATURES 4.3S P E C I A L F E AT U R E SCable Box Codes015,016015,016005003004015,016020054012,013,023,031,032,033,038,044,075,076,077011,012,020,021,042,056045,051,054012,013,023,031,032,033,038,044,054070,073006045,051015,016,027,029,034036,037,040,041,048,049001017024,046024011,035,047,069015,016,027,029,034,036037,040,041,048,049026,028,052015,016008,035,074011,020,021010,041007000,011,030,052,071,072054035054066019,067002019,067025,029,057,058,063039,040,049059,060015,016,027,029,034,036037,040,041,048,049052022,050,065,0694Enter three digits of the cable box code listed below foryour brand of cable box.Make sure you enter three digitsof the code, even if the first digit is a“0.” (If more than one code listed,try the first one.)5Press POWER. Your cable box should turn on. If your cablebox turns on, your remote control is now “set up” correctly.If your cable box does not turnon, repeat steps 2, 3, and 4, but tryone of the other codes listed for yourparticular brand of cable box. (If noother codes are listed, try each cablebox code, 000 through 035.)6Once your remote control is set up, press the CABLE buttonany time you want to use the remote to operate your cablebox.When your remote control isin the “CABLE” mode, the volumebuttons still control your TV’s vol-ume. Also, the VCR control buttons(PLAY, STOP, etc.) will still operateyour VCR.2Press the CABLE button on the top right of your remote con-trol.3On your Samsung remote control, press SET.The remote control has four“modes”: “TV,” “VCR,” “DVD” and“CABLE”.Press the “CABLE” button to switchthe remote control to the “Cable”mode.1Turn off yourcable box.Setting Up Your Remote Control to Operate Your Cable Box