CHAPTER FOUR: SPECIAL FEATURES 4.7S P E C I A L F E AT U R E S5Press VOL + toselect “On/Off.”Press CH (or CH )to turn the on-timer“On.” (Repeatedlypressing CH orCH will alternatebetween on and off.)6When finished, pressVOL +. To deactivate the “On time,”select “Off” during this step.7To set the Off time, pressCH to select “Offtime.”Press VOL + and set thehours and minutes.(Follow the same proce-dure as in steps 1~6above.)8When finished setting the timer, press MENU three times toexit.1Press the SLEEP button on the remote control.2Press SLEEP repeatedly until the appropriate time intervalappears (any of the preset values from “Off” to “180”). After about 5 seconds, the sleepdisplay will disappear from thescreen, and the time interval will beset.Setting the Sleep TimerThe sleep timer automatically shuts off the TV after a preset time(from 10 to 180 minutes). Absent Power OffWhen you set the timer “On”, yourtelevision will eventually be turnedoff, if you do not operate anycontrols during the 3 hours after theTV is turned on by timer.This function is available in only thetimer “On” mode and will prevent aleakage accident or overheating,caused by your TV left on for a longtime due to the timer “On” (whenyou are away on holiday, forexample).01193C(E)-CHAPTER 4 2/6/03 5:57 PM Page 7