U SING THE C ONTROL P ANEL2.12Network MenuThis menu lets you configure the network interface cardinstalled in your printer according to how the network is set up.You can upgrade the firmware of the network interface card, andprint the configuration.NOTE: This menu only appears when a network card is fitted(CLP-510N, or CLP-510 with an optional network card).(*: the default setting)Item ExplanationConfig NetworkSets whether or not you configure thenetwork.If you select Yes, you can configure theTCP/IP and Netware menus.If you select Yes, the following optionsare available: Config TCP, Config802.11b, and Netware.Config TCPSelect whether you set the IP address ornot.If you select Yes, you can configure theIP address.If you select Yes, the IP Get Methodoption appears on the display. You canselect how to get the IP address.IP Get MethodYou can set this item only when you setthe Config TCP to Yes.• BOOTP: The BOOTP server allots theIP address to you automatically.• DHCP: The DHCP server allots the IPaddress to you automatically.• Static: You can enter IP address,subnetmask, and gateway manually.Options: Yes, No*Options: Yes, No*Options: Static*, BOOTP, DHCP
