Samsung CLP-620 Series User Manual

Basic setup_ 344.basic setupAfter installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would liketo set or change values. This chapter gives you step-by-step instructions for setting up the machine.This chapter includes:• Altitude adjustment• Changing the display language• Setting job timeout• Using the power saving feature• Setting the default tray and paper• Changing font settingALTITUDE ADJUSTMENTThe print quality is affected by atmospheric pressure, which is determinedby the height of the machine above sea level. The following information willguide you on how to set your machine to the best print quality or best qualityof print.Before you set the altitude value, determine the altitude where you are.01 High 32 High 23 High 14 Normal1. Ensure that you have installed the printer driver with the providedPrinter Software CD.2. Double-click the Smart Panel icon on the Windows task bar (orNotification Area in Linux). You can also click Smart Panel on the statusbar in Mac OS X.3. Click Printer Setting.4. Click Setting > Altitude Adjustment. Select the appropriate value fromthe drop-down list, and then click Apply.• If your machine is connected to a network, SyncThru™ WebService screen appears automatically. Click Settings > MachineSettings > System > Setup > Altitude Adj.. Select theappropriate altitude value, and then click Apply.• If your machine is connected via a USB cable, set the altitude inAltitude Adj. option on the machine’s display (See "SystemSetup" on page 55).CHANGING THE DISPLAY LANGUAGETo change the language that appears on the display, follow the steps below:1. Press on the control panel.2. Press left/right arrow until System Setup appears and press OK.3. Press left/right arrow until Language appears and press OK.4. Press left/right arrow to display the language you want.5. press OK to save the selection.6. Press to return to ready mode.SETTING JOB TIMEOUTWhen there is no input for a certain period of time, the machine exits thecurrent menu and goes into the default settings. You can set the amount oftime the machine will wait.1. Press on the control panel.2. Press left/right arrow until System Setup appears and press OK.3. Press left/right arrow until Job Timeout appears and press OK.4. Press left/right arrow to select the time you want.5. press OK to save the selection.6. Press to return to ready mode.USING THE POWER SAVING FEATUREWhen you are not using the machine for a while, the machine turns to thepower save mode. Use this feature to save power.1. Press on the control panel.2. Press left/right arrow until System Setup appears and press OK.3. Press left/right arrow until Power Save appears and press OK.4. Press left/right arrow to select the time you want.5. press OK to save the selection.6. Press to return to ready mode.SETTING THE DEFAULT TRAY AND PAPERYou can select the tray and paper you would like to keep using for printingjob (See "Paper" on page 55).In the control panel1. Press on the control panel.2. Press left/right arrow until Paper appears and press OK.3. Press left/right arrow to select the paper tray you want and press OK.4. Press left/right arrow until Paper Size appears and press OK.5. Press left/right arrow to select the paper size you want.6. Press OK to save the selection.