Using USB memory device832. Menu Overview and Basic Setup1 Select (scan) > (Menu) > Scan Feature > USB Feature on thecontrol panel.Or select Scan to > (Menu) > Scan Feature > USB Feature on thecontrol panel.Or select Direct USB > Scan to USB > (settings) on the touch screen.2 Select the setting option you want appears.• Original Size: Sets the image size.• Original Type: Sets the original document’s.• Resolution: Sets the image resolution.• Color Mode: Sets the color mode. If you select Mono in this option,you cannot select JPEG in File Format.• File Format: Sets the file format in which the image is to be saved.When you select TIFF or PDF, you can select to scan multiple pages.If you select JPEG in this option, you cannot select Mono in ColorMode.• Duplex: Sets the duplex mode.• Darkness: Sets the brightness level to scan an original.• File Name: Sets the file name.• File Policy: Sets the policy to save files between overwirting orrenaming• PDF Encryption: Sets the encrypts PDF files.3 Select the desired status you want and press OK.4 Repeat steps 2 and 3 to set other setting options.5 Press (Stop/Clear) button or home( ) icon to return to readymode.You can change the default scan settings. Refer to the Advanced Guide.27Printing from a USB memory deviceYou can directly print files stored on a USB memory device.File s supported by Direct Print option.• PRN: Only files created by provided driver with your machine arecompatible.If you print PRN files created from other machine, the printout would bedifferent.• TIFF: TIFF 6.0 Baseline• JPEG: JPEG Baseline• PDF: PDF 1.7 or lower version.• XPS
