Samsung COLOR TELEVISION Owner's Instructions Manual

Contents

Samsung COLOR TELEVISION Owner's Instructions Manual Manual pdf 7 page image

English - 7Picture -Mode / Custom /Color Tone / Size /Digital NR / DNIe Jr◆ Mode: Dynamic/Standard/Movie/CustomYou can select the type ofpicture which bestcorresponds to your viewingrequirements.➢ You can select theseoptions simply by pressing the P.MODE button onthe remote control.◆ Custom: Contrast/Brightness/Sharpness/Color/Tint (NTSC only)The television has several settings which allow you tocontrol the picture quality.➢ If you make any changes to these settings, thepicture mode is automatically switched to Custom.◆ Color Tone: Cool2/Cool1/Normal/Warm1/Warm2◆ SizeYou can select the picture size which best corresponds toyour viewing requirements. It is variable depending onthe model.➢ You can change the picture size simply by pressingthe P.SIZE button on the remote control.◆ Digital NRIf the signal received by the television is weak, you canactivate this feature to reduce any static and ghostingthat may appear on the screen.◆ DNIe Jr (Digital Natural Image engine Junior)(depending on the model)This feature bring you more detailed image with detailenhancement, contrast enhancement and whiteenhancement. New image compensation algorithm givesbrighter, clearer, much detailed image to you. DNIe Jrtechnology will fit every signals into your eyes.Move Enter ExitMode : Dynamic √√Custom √√Color Tone : Normal √√Size : Normal √√Digital NR : Off √√DNIe Jr : On √√PictureTVSound -Mode / Equalizer /Auto Volume / Pseudo Stereo /Turbo Sound◆ Mode: Standard/Music/Movie/Speech/CustomYou can select the type ofspecial sound effect to beused when watching a givenbroadcast.➢ You can select theseoptions simply by pressing the S.MODE button onthe remote control.◆ EqualizerThe television has several settings which allow you tocontrol the sound quality.➢ If you make any changes to these settings, thesound mode is automatically switched to Custom.◆ Auto VolumeEach broadcasting station has its own signal conditions,and so it is not easy to adjust the volume every time thechannel is changed. This feature lets you automaticallyadjust the volume of the desired channel by lowering thesound output when the modulation signal is high or byraising the sound output when the modulation signal islow.◆ Pseudo StereoThis feature converts a monaural sound signal into twoidentical left and right channels. Once the PseudoStereo is set to On or Off, these settings apply to thesound effects such as Standard, Music, Movie, andSpeech.◆ Turbo SoundThis feature suitably emphasizes both higher and lowerbands of sound (and includes other effects). You canenjoy more magnificent and dynamic sound whenwatching music, movie, or other channels.➢ You can change the options simply by pressing theTURBO button on the remote control.Move Enter ExitMode : Custom √√Equalizer √√Auto Volume : Off √√Pseudo Stereo : Off √√Turbo Sound : Off √√SoundTVBefore contacting the Samsung after-sales service, performthe following simple checks. If you cannot solve the problemusing the instructions below, note the model and serialnumber of the television and contact your local dealer.No sound or picture◆ Check that the mains lead has been connected to awall socket.◆ Check that you have pressed the “ I ” button (On/Off)and the POWER button.◆ Check the picture contrast and brightness settings.◆ Check the volume.Normal picture but no sound◆ Check the volume.◆ Check whether the volume MUTE button on theremote control has been pressed.No picture or black and white picture◆ Adjust the color settings.◆ Check that the broadcast system selected is correct.Sound and picture interference◆ Try to identify the electrical appliance that is affectingthe television, then move it further away.◆ Plug the television into a different mains socket.Blurred or snowy picture, distorted sound◆ Check the direction, location and connections of youraerial.This interference often occurs due to the use of anindoor aerial.Remote control malfunctions◆ Replace the remote control batteries.◆ Clean the upper edge of the remote control(transmission window).◆ Check that the “+” and “-” ends of the batteries areinserted correctly.◆ Check that the batteries are drained.TroubleshootingAA68-03843X-00Eng_E.asia 4/3/06 9:52 AM Page 7

/ 8

Related manuals