21ENGYour television has several settings which allow you to controlpicture quality.1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the or button to select Picture.Result: The options available in the Picture group aredisplayed.3 Press the ENTER ( ) button.4 Press the or button to select Custom.5 Press the ENTER ( ) button.Result: The options available in the Custom group aredisplayed.6 Press the or button to select the option (Contrast,Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted.Press the ENTER ( ) button.Result: The horizontal bar is displayed. Move the horizontalbar’s cursor left or right by pressing the œ or √button.7 Press the EXIT ( ) button.Selecting the Color Tone1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the or button to select Picture.Result: The options available in the Picture group aredisplayed.3 Press the ENTER ( ) button.4 Press the or button to select Color Tone.5 Press the ENTER ( ) button.6 Press the or button to select the required option (Cool2,Cool1, Normal, Warm1 or Warm2).7 Press the ENTER ( ) button.➢ If you make any changes to these settings, the picturestandard is automatically switched to Custom. The television has an “automatic degaussing” systemthat is activated if magnetic interference is present.To degauss the television screen, switch power off bypressing the “ ” (On/Off) button on the front panel.(Refer to “Automatic Degaussing to Remove ColourPatches” on page 46.)Adjusting the Picture SettingsContrast 100Move Enter ReturnCustomContrast : 100Brightness : 45Sharpness : 50Color : 55TVMove Enter ReturnPictureMode : Dynamic √√Custom √√Color Tone : Normal √√Size : Normal √√Digital NR : Off √√DNIe Jr : On √√†† MoreTVMove Enter ReturnPictureMode : Dynamic √√Custom √√Color Tone : Normal √√Size : Normal √√Digital NR : Off √√DNIe Jr : On √√†† MoreTVMove Enter ReturnPictureMode : Dynamic √√Custom √√Color Tone : Normal √√Size : Normal √√Digital NR : Off √√DNIe Jr : On √√†† MoreTVCool2Cool1NormalWarm1Warm2