Samsung CS-29K30PQ Owner's Instructions Manual

Contents

English - 3◆ Source ListYou can switch betweenviewing signal fromconnected equipment, suchas a VCR, DVD, set-top box,and the TV source(broadcast or cable).➢ You can change the required external source simplyby pressing the VIDEO button on the remotecontrol. It might take a short period of time forpictures to be switched. To return to the TV mode,press the TV button on the remote control.◆ Edit NameYou can give a name to theexternal source.Input -Source List / Edit NameMove Enter ReturnTVAV1 - - - -AV2 - - - -S-Video - - - -Component - - - -Source ListTVMove Enter ReturnAV1 : Belgie √√AV2 : √√S-Video : √√Component : √√Edit NameTV- - - -VCRDVDCable STBSat. STBAV Recv.DVD Recv.GameCamcorderDVD Combo2 Select the appropriatedlanguage by pressing the… or † button. Press theENTER button.The Check antenna input. is displayed.➢ If any language is not selected, the language menuwill disappear about 30 seconds later.3 Make sure that the antennais connected to thetelevision (refer to page 1).Press the ENTER button.The Auto Store menu isdisplayed with Areaselected.4 Press the ENTER button again.5 Press the … or † button to select your area. Press theENTER button.6 To search the channels,select Search by pressingthe … or † button. Pressthe ENTER button.7 Press the ENTER buttonagain to start searchchannels. To stop thesearch, press the ENTERbutton.When the channelsearching has finished, theTime menu is displayedwith Clock selected.8 Press the œ or √ button tomove to the hour or minute.Set the hour or minute by pressing the … or † button.continued...Check antenna input.Enter ExitMove Enter ReturnArea : Belgie √√Search √√Auto StoreTVASIA W/EUROPECIS E/EUROPECHINAHONGKONG U/KAUSTRALIANZ/INDONESIASOUTH AFRICAAMERICASearchEnter ReturnStart9 When you have finished,press the MENU button.The Enjoy your watching is displayed, and then thechannel which has been stored will be activated.Re-setting the Plug & PlayMethod: MENU ➜ …/†(Setup) ➜ ENTER ➜ …/†(Plug & Play) ➜ ENTERMove Enter ReturnPlug & Play √√Language : EnglishTime √√Child Lock √√Blue Screen : Off √√Melody : On √√Demonstration √√SetupTVSearchEnter ReturnStopP 1 C-- ----- 102MHz7 %Enjoy your watchingViewing the Menus1 Press the MENU button.The main menu is displayed on the screen. Its left sidehas five icons: Input, Picture, Sound, Channel, andSetup.2 Press the … or † button to select one of the icons.Press the ENTER button to access the icon’s sub-menu.3 Press the … or † button to move to items in the menu.Press the ENTER button to enter items in the menu.4 Press the …/†/œ/√ button to change the selecteditems. Press the MENU button to return to the previousmenu.5 Press the EXIT button to exit from the menu.Setup - Plug & PlayWhen the television is initially powered on, several basiccustomer settings proceed automatically and subsequently.The following settings are available.1 If the television is in standbymode, press the POWERbutton on the remotecontrol.The Plug & Play isdisplayed. It flickers for alittle while, and thenLanguage menu isdisplayed.continued...Plug & Play Move Enter ReturnClock - - : - - amSleep Timer : OffOn Timer - - : - - am OffOff Timer - - : - - am OffOn Timer Volume : 10TimeTVMove EnterLanguageEnglishFrançaisTürkçeAA68-03627A-01Eng_mind_pip 11/21/05 9:34 AM Page 3