21ENGYour television has several settings which allow you to controlpicture quality.1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the ▼ or ▲ button to select Picture.Result: The options available in the Picture group aredisplayed.3 Press the ENTER ( ) button.4 Press the ▼ or ▲ button to select Custom.5 Press the ENTER ( ) button.Result: The options available in the Custom group aredisplayed.6 Press the ▼ or ▲ button to select the option (Contrast,Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted.Press the ENTER ( ) button.Result: The horizontal bar is displayed. Move the horizontalbar’s cursor left or right by pressing the W or Xbutton.7 Press the EXIT ( ) button.Selecting the Color Tone1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the ▼ or ▲ button to select Picture.Result: The options available in the Picture group aredisplayed.3 Press the ENTER ( ) button.4 Press the ▼ or ▲ button to select Color Tone.5 Press the ENTER ( ) button.6 Press the ▼ or ▲ button to select the required option (Cool2,Cool1, Normal, Warm1 or Warm2).7 Press the ENTER ( ) button.➢ ◆ If you make any changes to these settings, the picturestandard is automatically switched toCustom.◆ The television has an “automatic degaussing” systemthat is activated if magnetic interference is present.To degauss the television screen, switch power off bypressing the “ ” (On/Off) button on the front panel.(Refer to “Automatic Degaussing to Remove ColourPatches” on page 46.)Adjusting the Picture SettingsContrast 100Move Enter ReturnCustomContrast : 100Brightness : 45Sharpness : 50Color : 55TVMove Enter ReturnPictureMode : Dynamic √Custom √Color Tone : Normal √Size : Normal √Digital NR : Off √DNIe Jr : On √† MoreTVMove Enter ReturnPictureMode : Dynamic √Custom √Color Tone : Normal √Size : Normal √Digital NR : Off √DNIe Jr : On √† MoreTVMove Enter ReturnPictureMode : Dynamic √Custom √Color Tone : Normal √Size : Normal √Digital NR : Off √DNIe Jr : On √† MoreTVCool2Cool1NormalWarm1Warm2