20ENGAdjusting the Picture SettingsYour television has several settings which allow you to control picturequality: Color Tone, Contrast, Brightness, Sharpness, Color,Tint (NTSC only)1 Press the MENU button.Result: The “Picture” menu is displayed.2 Press the + or – button.3 Press the or button to select the “Adjust”, and then press the +or – button.Result: When select the “Mode” to “Custom”, the “Adjust” menu isdisplayed.4 To adjust the... Press the... Color Tone + or – button.Result: You select the required option(Normal, Warm1, Warm2,Cool1, Cool2). Contrast + or – button. Brightness Result: The horizontal bar is displayed. Sharpness Color Tint (NTSC only)➣ The “Sharpness” and “Tint” are not available in DVDmode.5 When you are satisfied with the settings, press the TV button or,press the MENU button repeatedly to return to normal viewing.➣ The television has an “automatic degaussing” system that isactivated if magnetic interference is present. To degauss thetelevision screen, switch power off by pressing the “ ”(ON/OFF) button on the front panel (refer to “AutomaticDegaussing to Remove Color Patches” on page 35).➣ If you make any changes to the “Adjust” settings, the picturestandard is automatically switched to “Custom”.Select Enter ExitMode CustomAdjustDigital NR : OffPictureSelect Adjust ExitAdjustColor Tone : NormalContrast 100Brightness 50Sharpness 50Color 50PictureContrast 91Select Adjust ExitAdjustColor Tone : NormalContrast 100Brightness 50Sharpness 50Color 50PictureContrast 100