Samsung CS21Z30 Owner's Instructions Manual

Also see for CS21E22: Owner's instructions Owner's instructions Owner's instructions Owner's instructions Owner's instructions

Contents

English - 1Control Panel (depending on the model)➢ The product colour and shape may vary depending on themodel. You can use the 3 buttons to switch the TV on when it isin standby mode depending on the model. The 2 and 3 buttons also have the same function as the◄/►/▲/▼ buttons on the remote control. If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.COLOUR TELEVISIONAA68-03905A-06Owner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product at www.samsung.com/global/register.Record your Model and Serial number.▪ Model __________ ▪ Serial No. __________CS 21Z30/21Z40/21Z45/21Z50/21Z57/21Z58/21K40/21M40/21E22/21A530/21A730Connection Panel (depending on the model)➢ The product colour and shape may vary depending on the model.☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.☛ Please be sure to match the colour coded input terminals andcable jacks.continued...Connecting to the RCA InputThe 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectorsare used for equipment, such as a camcorder, video discplayer, or video game device.Connecting HeadphonesThe 3 (headphone) jack is used for watching a televisionprogramme without disturbing the other people in the room.Prolonged use of headphones at a high volume may damageyour hearing.➢ When both the front (or side) AV and rear connectors areconnected to external equipment, the front (or side) AVreceives priority.Front (or Side) Panel1 On-screen menu display2 Volume adjustment3 Channel selection4 Remote control sensor5 Standby indicator6 Power on/offRear Panelcable televisionnetworkorFront (or Side) PanelConnecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the 1 (75 Ω coaxialsocket). To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdoor aerial,cable television network, or satellite network. If you are usingan indoor aerial, you may need to adjust it when tuning yourtelevision until you obtain a picture that is both sharp and clear.Connecting to the RCA OutputThe RCA2 connectors are used for equipment, such as arecording VCR or audio system.Connecting to the RCA InputThe RCA3 connectors are used for equipment, such as a VCR,DVD, decoder, satellite receiver, video game device, or videodisc player. (When using the mono equipment, connect to theAUDIO-L input connector.) The RCA4 connectors are used forequipment such as a DVD with component output (480i/576i).cable televisionnetworkorcable televisionnetworkorcable televisionnetworkor121231 Audio input2 Video input3 Headphone jack123AA68-03905A-06Eng.indd 1 2008-01-10 ¿ÀÀü 11:35:25