21ENGAdjusting the Picture SettingsYour television has several settings which allow you to control picturequality:◆ Color Tone, Contrast, Brightness, Sharpness, Color,Tint (NTSC only)1 Press the MENU button.Result: The Picture menu is displayed.2 Press the œ or √ button.3 Press the ▲ or ▼ button to select the Adjust, and then press the œor √ button.Result: When select the Mode to Custom, the Adjust menu isdisplayed.4 To adjust the... Press the...◆ Color Tone ◆ œ or √ button.Result: You select the required option(Normal, Warm1, Warm2,Cool1, Cool2).◆ Contrast ◆ œ or √ button.◆ Brightness Result: The horizontal bar is displayed.◆ Sharpness◆ Color◆ Tint (NTSC only)➣ The Sharpness and Tint are not available in DVDmode.5 When you are satisfied with the settings, press the EXIT ( ) buttonor, press the MENU ( ) button repeatedly to return to normalviewing.➣ The television has an “automatic degaussing” system that isactivated if magnetic interference is present. To degauss thetelevision screen, switch power off by pressing the “ ”(ON/OFF) button on the front panel (refer to “AutomaticDegaussing to Remove Color Patches” on page 37).➣ If you make any changes to the Adjust settings, the picturestandard is automatically switched to Custom.Contrast 100PictureMode œœ Custom √Adjust √Digital NR : OffTilt : 0Select Enter ExitPictureAdjustColor Tone: NormalContrast 100Brightness 50Sharpness 50Color 50Select Adjust ExitPictureAdjustColor Tone: NormalContrast 100Brightness 50Sharpness 50Color 50Select Adjust Exit