46ENGTroubleshooting: Before Contacting Service PersonnelBefore contacting Samsung after-sales service, perform the following simple checks.If you cannot solve the problem using the instructions below, note the model and serial number of thetelevision and contact your local dealer.No sound or pictureNormal picture but no soundNo picture or black and white pictureSound and picture interferenceBlurred or snowy picture,distorted soundRemote control malfunctions Check that the mains lead has been connected to a wall socket. Check that you have pressed the “ ” button (On/Off) and thePOWER ( ) button. Check the picture contrast and brightness settings. Check the volume. Check the volume. Check whether the volume MUTE ( ) button on the remote controlhas been pressed. Adjust the colour settings. Check that the broadcast system selected is correct. Try to identify the electrical appliance that is affecting the television,then move it further away. Plug your television into a different mains socket. Check the direction, location and connections of your aerial.This interference often occurs due to the use of an indoor aerial. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals.Automatic Degaussing to Remove Colour PatchesA degaussing coil is mounted around the picture tube, so you do not normally need to degauss thetelevision manually.If you move the television to a different position and color patches appear on the screen, you must: Switch the television off by pressing the “ ” (On/Off) button on the front panel Unplug the television from the wall socket Leave the television power-off for about 30 minutes so that the automatic degauss functioncan be activated, and then press the “POWER ” button on the remote control.☛ If your television will be left unattended, press the “ ” (On/Off) button to turn yourtelevision off.