Samsung CS29Z40ZQTXNWT Service Manual

Also see for CW-29Z404N: Owner's instructions Owner's instructions

Alignment & Adjustment3-20 Samsung Electronics3-6-3 Adjusting the White Balance1. Initialize all settings to the values appropriate to the corresponding model.2. Select "Info → Menu → Mute → Power On" to enter Service Mode.3. Initialize all settings to the values appropriate to the corresponding model.4. Display the Toshiba pattern and adjust the White Balance using CA100 with the coordinates of the corresponding model.5. Enter Video Adjust1 of Service Mode. Adjust Low/Light.- Adjust Sub Bright to set Y.- Adjust B Cutoff to set y.- Adjust R Cutoff to set x.6. Enter Video Adjust1 of Service Mode. Adjust High/Light.- Adjust Sub Contrast to set Y.- Adjust B Drive to set y.- Adjust R Drive to set x.7. Check Low/Light and readjust it if its value has been changed.8. If you have readjusted Low/Light, readjust High/Light until the two values are identical to the coordinates of the correspondingmodel.※ White Balance Standard Data3-6-4 Check List for the Screen Voltage and White Balance Adjustment1. The Screen Voltage and White Balance are connected each other, and both of them have to be configured to the correct values.2. Adjust the White Balance after the Screen Voltage was adjusted, and check if the Screen Voltage is normal after adjusting theWhite Balance.3. If the White Balance is readjusted, check the Screen Voltage again.4. When the adjustment is finished, check the following checklist.- If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again.- If there is a ghost line on the screen, adjust the Screen Voltage again.No Item Data Required Adjustment1 WhiteBalancex:300± 3 y:290± 3 Y:30± 3x:265± 3 y:266± 3 Y:2.0± .3 White Balance (Standard Data)