Samsung CS34A10 Owner's Instructions Manual

Also see for CS-34A10HV: Owner's instructions

Contents

This TV’s remote control can operate almost any VCR, Cable box,or DVD, in addition to controlling the TV.➢ The remote control might not be compatible with the TVmanufactured by another company.1 Turn off your VCR, Cable box, or DVD.2 Press the SELECT button repeatedly to activate anothercomponent (TV, VCR, CATV, DVD).Example: If you want to program the remote control to operateyour VCR, make sure that VCR is displayed3 Press the SET button.4 Use the numeric buttons to enter the code by manufacturer. Eachcode must be three digits long.Example: To enter the code “6”, press 0, 0, and 6.To enter the code “76”, press 0, 7, and 6.➢ See the remote control code tables to find the appropriatecode for your particular component. If more than one codeis listed, try each one separately until you find the one thatworks.5 Press the POWER ( ) button on the remote control.The component you select should turn on. If it turns on, yourremote control is now set correctly.➢ If it does not turn on, repeat steps above, but try one of theother codes listed for the brand of particular yours.6 Once your remote control is set up, press the SELECT button anytime you want to use the remote to operate your VCR, Cable box,or DVD.➢ ◆ When your remote control is in the VCR, CATV, or DVDmode, the volume buttons still control your TV’s volume.◆ When your remote control is in the TV or CATV mode,the VCR or DVD control buttons (PLAY, PAUSE, etc.)still operate your VCR or DVD.60ENGProgramming the Remote Control for Other ComponentsVCRS58A_UK(02796A-01) 11/10/03 9:17 AM Page 60