Samsung CT-21K3W Owner's Instructions Manual

Contents

11Connecting VHF and UHF AntennasIf your antenna has a set of leads thatlook like this, see “Antennas with300-ohm Flat Twin Leads,” below.If your antenna has one lead that lookslike this, see “Antennas with 75-ohmRound Leads,” on page 12.If you have two antennas, see “SeparateVHF and UHF Antennas,” on page 12.Antennas with 300-ohm Flat Twin LeadsIf you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has300-ohm twin flat leads, follow the directions below.C h a p t e r Tw oI N S TA L L AT I O N1Place the wires from thetwin leads under thescrews on the 300-75 ohmadaptor (not supplied).Use a screwdriver totighten the screws.2Plug the adaptor into theVHF/UHF terminal on thebottom of the back panel.2