Samsung CT-21M7W Owner's Instructions Manual

Also see for CL21A8W: Manual Owner's instructions Owner's instructions Instrucciones del usuario Owner's instructions

Contents

4.1 CHAPTER FOUR: SPECIAL FEATURESCustomizing Your Remote Control (CL21M6W)Your TV comes equipped with a “universal” remote control. In addition tocontrolling the TV, the universal remote can also operate a VCR and a cable box(even if your VCR and cable box are made by manufacturers other than Samsung).Setting Up Your Remote Control to Operate Your VCR1Turn off your VCR.3Press the VCR button on the top right of your remote control.2On your Samsung remote control, press SET. The remote control has three“modes”: “TV,” “VCR”, and “Cable”Press the “VCR” button to switch theremote control to the “VCR” mode.4Enter both digits of the VCR code listed on the next page foryour brand of VCR.Make sure you enter both digits ofthe code, even if the first digit is a “0.”If more than one code listed, try thefirst one.5Press the POWER button on the remote control. Your VCRshould turn on. If your VCR turns on, your remote control isnow set correctly.If your VCR does not turn on,repeat steps 2, 3, and 4, but try oneof the other codes listed for thebrand of your particular VCR.If no other codes are listed, try eachcode, 000 through 72.6Once your remote control is set up, press the VCR buttonany time you want to use the remote to operate your VCR.When your remote control is inthe “VCR” mode, the volume buttonsstill control your TV’s volume.When your remote is in the “TV”mode, the VCR control buttons (PLAY,PAUSE, etc.) will still operate yourVCR.C h a p t e r F o u rS P E C I A L F E AT U R E S02647B(E)-CHAPTER 4 2/7/03 9:39 AM Page 1