Samsung CW-29A2083 Owner's Instructions Manual

Also see for CW-29A2083: Owner's instructions

Contents

English - 35Use the remote control to switch between viewing signal fromconnected equipment, such as VCR, DVD, Set-Top-boxes and theTV source (broadcast or cable)1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the œ or √ button to select Input.Result: The options available in the Input group aredisplayed.3 Press the œ or √ button again to select Source List.Result: The options available in the Source List group aredisplayed.4 Press the or button to select signal source, then press theœ or √ button.➢ When you connect equipment to the TV, you can choosebetween the following sets of jacks : EXT1 or EXT2 on theTV’s rear panel, and EXT3/S-Video on the TV’s side panel.➢ You can also set these options simply by pressing theSOURCE ( ) button. If you change the externalsource while viewing, pictures might take a short period oftime to be switched.Edit Name1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the œ or √ button to select Input.Result: The options available in the Input group aredisplayed.3 Press the or button to select Edit Name . Press the œ or √button.Result: The options available in the Edit Name group aredisplayed.4 Press the or button to select external device :EXT1 - EXT2 - EXT3 - S-Video.5 Press the œ or √ button.6 Select the name by pressing the ➛or ❿ button.7 Set other signal sources (EXT1, EXT2, EXT3, S-Video) using thesame method as listed above.Viewing an External Signal Source/Edit Name (depending on the model)Move œœ √√ Enter ReturnInputSource List : TV √√Edit Name √√TVMove œœ √√ Enter ReturnInputSource List : TV √√Edit Name √√TVMove œœ √√ Adjust ReturnEdit NameEXT1 œœ ------ √√EXT2 : ------EXT3 : ------S-Video : ------TVMove œœ √√ Adjust ReturnEdit NameEXT1 œœ DVD √√EXT2 : ------EXT3 : ------S-Video : ------TVMove œœ √√ Enter ReturnSource ListTVWISE LINKEXT1 : ------EXT2 : ------EXT3/S-Video : ------TV