When the television is initially powered on, three basic customersettings proceed automatically and subsequently: setting thelanguage, channel and clock.1 If the television is in Standby mode, press the POWER ( ) buttonon the remote control.Result: The message Plug & Play is displayed. It flickers fora little while and then Language menu is automaticallydisplayed.2 Select the appropriate language by pressing the or button.Press the MENU ( ) button to enter the language.Result: The message Check antenna input. is displayed.➢ If any language is not selected on the Language menu, theLanguage menu will disappear about 30 seconds later.3 Make sure that the antenna is connected to the TV.Press the œ or √ button.Result: The Auto Store menu is displayed with Country isselected.4 Select your country by pressing the œ or √ button. To search thechannels, select Search by pressing the or button, and thenpress the œ or √ button. Press the MENU ( ) button to stop thesearch.Result: The Time menu is displayed with Clock is selected.➢ Refer to “Storing Channels Automatically” on page 13.5 Press the œ or √ button to move to the hour or minute. Set thehour or minute by pressing the or button.➢ Refer to “Setting and Displaying the Current Time” on page31.6 When you have finished, press the MENU ( ) button.Result: The message Enjoy your watching. is displayed,and then the channel which has been stored will beactivated.7 If you want to reset this feature...1 Press the MENU ( ) button.2 Press the or button to select Setup, and then press theENTER ( ) button.Result: The Plug & Play is selected.3 Press the ENTER ( ) button again.Result: This feature starts with the message Plug & Playis displayed.Plug & Play FeaturePlug & PlayEnjoy your watching.Move Enter ReturnSetupPlug & Play √√Language : EnglishTime √√Blue Screen : OffMelody : OnDemonstration √√TVMove œœ √√ Adjust SkipAuto StoreCountry œœ UK √√Search : -/+TVMove œœ √√ Adjust SkipTimeClock -- : --Sleep Timer : OffOn Timer -- : -- OffOff Timer -- : -- OffOn Timer Volume : 10On Timer Channel : 1TVCheck antenna input.œœ √√ Move SkipEnglish-11Move SkipEnglishDeutschFrançaisNederlandEspañolItalianoSvenskaPortuguês∂ÏÏËÓÈοâe‰tinaSrpskiHrvatskiRomân™MagyarPolskiêÛÒÒÍËÈÅ˙΄‡ÒÍËTürkçeTV LanguageGet user manuals: See SafeManuals.com