Samsung CW-29M066V Owner's Instructions Manual

Also see for CS29Z6: Owner's instructions Owner's instructions Manual

Contents

12ENGWhen the television is initially powered on, three basic customersettings proceed automatically and subsequently: setting thelanguage, channel and clock.1 If the television is in Standby mode, press the POWER ( ) buttonon the remote control.Result: The message Plug & Play is displayed. It flickers fora little while and then Language menu is automaticallydisplayed.2 Select the appropriate language by pressing the ▲ or ▼ button.Press the MENU button to enter the language.Result: The message Ant. Input : Check is displayed.➣ If any language is not selected on the Language menu, theLanguage menu will disappear about 30 seconds later.3 Make sure that the antenna is connected to the TV. Press the - or+ button.Result: The Auto store menu is displayed with Country isselected.4 Select your country by pressing the - or + button. To search thechannels, select Search by pressing the ▲ or ▼ button, and thenpress the - or + button. Press the MENU button to stop thesearch.Result: The Time menu is displayed with Clock is selected.➣ Refer to “Storing Channels Automatically” on page 14.5 Press the - or + button to move to the hour or minute. Set thehour or minute by pressing the ▲ or ▼ button.➣ Refer to “Setting and Displaying the Current Time” on page30.6 When you have finished, press the MENU button.Result: The message ENJOY YOUR WATCHING is displayed,and then the channel which has been stored will beactivated.7 If you want to reset this feature...1 Press the MENU button.2 Press the ▲ or ▼ button to select Setup, and then press the -or + button.Result: The Plug & Play is selected.3 Press the - or + button again.Result: This feature starts with the message Plug & Playis displayed.Plug & Play FeaturePlug & PlayENJOY YOUR WATCHINGSetupPlug & Play √√Language √√Blue screen : OnDemonstration √√Tilt : 0TVAuto storeCountry : OthersSearch : -/+TVTimeClock : -- : --Timer : OffTVAnt. Input : Check