21ENG◆ Digital NRIf the signal received by your television is weak, you canactivate this feature to reduce any static and ghosting thatmay appear on the screen.◆ LNA (Low Noise Amplifier)This function is very useful in the situation that the TV is usedin weak signal. LNA amplifies the TV signal in the weaksignal area, but not noise. This feature is working only weaksignal condition, and that is memorized on current channel,additional.◆ DNIe (Digital Natural Image engine )This feature bring you more detailed image with 3D noisereduction, detail enhancement, contrast enhancement andwhite enhancement. New image compensation Algorithmgives brighter, clearer, much detailed image to you.DNIe TM technology will fit every signals into your eyes.◆ Scan modeYou will normally find that scan mode is best set to Naturalto reduce any slight picture flicker. However, it is possible thatsome occasional broadcasts (NTSC-M) may benefit bychanging the scan mode. Natural, Digital andProgressive modes are available.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the - or + button.3 Select the required option (Digital NR, LNA, DNIe or Scanmode) by pressing the or button.4 Press the - or + button to change the setting.◆ Digital NR : Off or On (activating)◆ LNA : Off or On (activating)◆ DNIe : Off, Demo or On (activating)➣ You can also set these options simply bypressing the DNIe button.◆ Scan mode : Natural, Digital or ProgressiveExtra Picture SettingsPictureMode œœ Dynamic √√Adjust √√Digital NR : OnLNA : OffDNIe : OnScan mode : NaturalTVPictureMode œœ Dynamic √√Adjust √√Digital NR : OnLNA : OffDNIe : OnScan mode : NaturalTVPictureMode œœ Dynamic √√Adjust √√Digital NR : OnLNA : OffDNIe : OnScan mode : NaturalTVPictureMode œœ Dynamic √√Adjust √√Digital NR : OnLNA : OffDNIe : OnScan mode : NaturalTVPIPGet user manuals: See SafeManuals.com