Samsung CZ-21K5ML Owner's Instructions Manual

Also see for CZ-21K5ML: Owner's instructions

Contents

10ENGPlug & Play FeaturePlug & PlayAuto Store ExitAnt. Input CheckExitP 1 VHF1When the television is initially powered ON, three basic customersettings proceed automatically and subsequently: setting thelanguage, channel and clock.1 If the television is in Standby mode, press the POWER buttonon the remote control.Result: The message Plug & Play is displayed. It flickers for alittle while and then the Language menu is automaticallydisplayed.2 Press the or button to select required language. Press theMENU button to enter the language, and then the message Ant.Input Check is displayed. If any language is not selected on the Language menu, theLanguage menu will disappear after 30 seconds.3 Make sure that the antenna is connected to the TV. And then pressthe + or button to store the channels (refer to Storing theChannels Automatically on page 12).Result: The horizontal bar is displayed, and then channels arestored in an order which reflects their positions in thefrequency range.4 When searching and storing is complete, the Time menu isdisplayed.5 Press the + or button to move to the hour or minute. Set the houror minute by pressing the or button (refer to Setting andDisplaying the Current Time on page 26).6 When you have finished, press the MENU button.Result: The message ENJOY YOUR WATCHING is displayed,and then the channel which has been stored will beactivated.7 If you want to reset this feature...1 Press the MENU button.2 Press the or button to select the Function , and thenpress the + or button.3 Select the Plug & Play by pressing the or button, andthen press the + or button.Result: The message Plug & Play is displayed.Move ExitTimeClock 11 : 35Enjoy Your Watching...Select Enter ExitLanguage : EnglishTimePlug & PlayBlue Screen : OffChild LockFunctionENJOY YOUR WATCHINGTimeClock - - : - - am"""""" """"""""" "" """"" ""Reminder