Samsung Control Unit User Manual
                                                    | |
Contents
| 
Operating basic function _17ENGLISHSPaCE CooLING oPERaTIoNIn this mode, heating function will be activated as required by target water temperature.Target water temperature is determined in 2 ways as described below.• Change set value manually.• Use mode of “Water Law” (Auto mode).1. Press Power (Space mode) button to turn on the heatpump unit.The heat pump will be turned on in the mode you select.• Space water cooling devices: Radiator or Fan coil unit(field supply)• Heating and cooling mode can not be selected atthe same time.• Space cooling operation is not possible if theinstallation is a heating only installation.The heat pump has a built-in protection mechanismto prevent the unit from being damaged when it isstarted immediately after being plugged in or stopped, the heat pump will start up after 3minutes.2. Press the Mode (Space mode) button twice to select the space cooling mode.The heat pump will run on cooling mode.3. Press Up or Down button to set the desired temperature.The temperature can be set between 5ºC and 25ºC.The temperature is adjusted by 0.5ºC.CAUTIONRC120MHXGA_IB_E_34412A(1).indd 17 2012-02-08 오후 2:35:39 |
Related manuals
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine