Ś48śExposure compensationƅ Exposure compensation : This camera automatically adjusts the exposureaccording to the ambient lighting conditions.You can also select the exposure value by using the+ / - button.ƀ Compensating Exposure1. Press the + / - button, and then use the UP andDOWN buttons to select the exposurecompensation icon ( ).The exposure compensation menu bar willappear as shown.2. Use the LEFT and RIGHT buttons to set thedesired exposure compensation factor.3. Press the + / - button again. The value you set will be saved and the ExposureCompensation setup mode will close.If you change the exposure value, the exposure indicator ( ) will bedisplayed on the bottom of the LCD monitor.ż A negative exposure compensation value reduces the exposure.Note that a positive exposure compensation value increases the exposureand the LCD monitor will appear white or you may not get good pictures.6-2 -1 0 +1 +2EVStarting play modeƅ If the memory card is inserted in the camera, all the camera functions apply onlyto the memory card.ƅ If the memory card is not inserted in the camera, all the camera functions applyonly to the internal memory.ƅ If you have turned on the camera by pressing the POWER button, you can pressthe PLAY MODE button once to switch to Play mode and press it again to switchto Recording mode.ƅ You can turn the power on with the play mode button. The camera is turned on inplay mode. Press the play mode button again and the camera will be turned off.ƅ You can set up the PLAY mode function by using the camera buttons and LCDmonitor.2. The last image stored on the memory isdisplayed on the LCD monitor.ƀ Playing back a still image1. Select the PLAY mode by pressing theplay mode button ( ).100-00073. Select an image that you want to play backby pressing the LEFT / RIGHT button.ż Press and hold the Left or Right button tofast forward the images played.