Setting up your French Door RefrigeratorMaKing MinoR aDJustMents Between DooRsRemember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review theprevious section on leveling the Refrigerator.16_ Setting Up1. If you open the drawer ( 1 ), you can see the lower hinge ( 2 ).2. Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the lower hinge.3. Please adjust the height by turning the hex wrench ( 3 ) clockwise( ) or counter-clockwise( ).when you turn the hex wrench counter-clockwise( ), the door will move up.1. After adjusting the doors, please insert the supplied fastener-ring ( 5 ) using a pair of pliers ( 6 ) in thegap between the hinge-grommet ( 7 ) and the lower hinge( 8 ). The number of fastener-rings you’ll needto insert depends on the gap.Two fastener-rings are enclosed with the refrigerator.The thickness of each fastener-ring is 0.04 inch.When the leftdoor is lowerthan the rightdoor.When the leftdoor is higherthan the rightdoor.AdjustmentpartAdjustmentpart31342DA68-01812G.indb 16 2009.8.10 9:8:3 AM
