Samsung DC32E-M Quick Setup Manual

Also see for DC32E-M: User manual User manual User manual

Contents

quick setup guide

Quick Setup Guide− The colour and the appearance may differ depending on the product, and thespecifications are subject to change without prior notice to improve the performance.− Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsDC32E-M DC40E-M DC48E-M DC55E-MDC40E-H DC48E-HBN68-07848H-00The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.Reverse Side1 Connects to the audio of a source device.2 Connects to a source device using the AV/Component adapter.3 Receives sound from a PC via an audio cable.4 Connect to a USB memory device.5 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box (sold separately).6 Connects to a source device using an HDMI cable.7 Supplies power to the external sensor board or receives the light sensor signal.8 Connects to MDC using an RS232C adapter.9 Connects to a source device using a D-SUB cable.0 Connects to MDC using a LAN cable.Issues SolutionsThe screen keepsswitching on and off. Check the cable connection betweenthe product and PC, and ensure theconnection is secure.No Signal is displayedon the screen.Check that the product is connectedcorrectly with a cable.Check that the device connected to theproduct is powered on.Not Optimum Mode isdisplayed. This message is displayed when a signalfrom the graphics card exceeds the product’smaximum resolution and frequency.Refer to the Standard Signal Mode Tableand set the maximum resolution andfrequency according to the productspecifications.The images on thescreen look distorted.Check the cable connection to theproduct.The screen is not clear.The screen is blurry.Adjust Coarse and Fine.Remove any accessories (video extensioncable, etc) and try again.Set the resolution and frequency to therecommended level.The screen appearsunstable and shaky.Check that the resolution and frequencyof the PC and graphics card are set withina range compatible with the product.Then, change the screen settings ifrequired by referring to the AdditionalInformation on the product menu and theStandard Signal Mode Table.There are shadows orghost images left onthe screen.Issues SolutionsThe screen is too bright.The screen is too dark. Adjust Brightness and Contrast.Screen colour isinconsistent.Go to Picture and adjust the Colour Spacesettings.White does not reallylook white.Go to Picture and adjust the White Balancesettings.There is no sound. Check the connection of the audio cable oradjust the volume.Check the volume.The volume is too low. Adjust the volume.If the volume is still low after turningit up to the maximum level, adjust thevolume on your PC sound card or softwareprogramme.The remote controldoes not work.Make sure that the batteries are correctlyin place (+/-).Check if the batteries are flat.Check for power failure.Make sure that the power cord isconnected.Check for any special lighting or neonsigns switched on in the vicinity.Troubleshooting GuideChecking the Components Control PanelContact the vendor where you purchased the product if anycomponents are missing.The pictures may look different from the actual components.SpeakerSpeakerDC32E-M1 Power on the product.If you press the button when the product is turned on, thecontrol menu will be displayed.- To exit the OSD menu, press and hold the panel key for at leastone second.2 Move to the upper or lower menu. You can also adjust the valueof an option.3 Move to the left or right menu.- You can adjust the volume by moving the panel key left or rightwhen the control menu is not displayed.4 Remote sensorPress a button on the remote control pointing at the sensor onthe front of the product to perform the corresponding function.5 Spacer logo (Optional)Do not pull on the spacer logo using force. The logo may tear orbreak off.Quick Setup Guide Warranty card(Not available in some locations)MagicInfo SoftwareDVDPower cord Batteries(Not available in some locations) Remote ControlRS232C(IN) adapter AV/Component adapter AUDIO adapterDCE-M_DCE-H_India_QSG_BN68-07848H-00.indd 1 2016-03-11 1:26:48

/ 2

Related manuals for Samsung DC32E-M