GB-2SAFETY INSTRUCTIONSThis STB has been manufactured to satisfy international safety standards.Please read the following recommended safety precautions carefully.MAINS SUPPLY: AC 230V~, 50/60HzOVERLOADING: Do not overload wall outlets, extension cords or adapters as this canresult in fire or electric shock.LIQUIDS: Keep liquids away from the STB.CLEANING: Before cleaning, disconnect the STB from the wall socket. Use a clothlightly dampened with water(no solvents) to clean the exterior.VENTILATION: Do not block the STB ventilation holes. Ensure that free airflow ismaintained around the STB. Never store the STB where it is exposed todirect sunlight or near heating equipment e.g. a radiator.Never stack other electronic equipment on top of the STB. Place theSTB at least 10cm from the wall.ATTACHMENTS: Do not use any attachment that is not recommended by themanufacturer; it may cause a hazard or damage the equipment.CONNECTION OF CABLE, TV, AND STB:Connect all components before plugging any power cords into the walloutlet. Always turn off the STB, TV and other components before youconnect or disconnect any cables. To disconnect this STB, from themains, the plug must be pulled out from the mains socket, therefore themains plug shall be readily operable.SERVICING: Do not attempt to service this product yourself. Any attempt to do sowill make the warranty invalid. Refer all servicing to a qualified serviceagent.LIGHTNING: If the STB is installed in an area subject to intense lightning activity,protection devices for the STB mains connector and modem telephoneline are essential.The individual manufacturer’s instruction for safeguarding otherequipment, such as TV set, Hi-Fi, etc., connected to the STB must alsobe followed during lightning storms.GROUNDING: Signal cable MUST BE EARTHED. The grounding system must complywith SABS 061.Dispose the used batteries at designated place for environment protection.