Samsung DCS 816 Installation Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual General description

Contents

SAMSUNGDCS-816 Installation Manual7-27.2 External Paging (Figure 7-2)The DCS-816 system is equipped with an interface for external paging. It can be connected to cus-tomer-provided paging equipment. The interface is designed to match 600 Ohm and an impedancematching transformer may be required if the impedance of the paging equipment is not 600 Ohm.The system requires MDF connection for external paging and the connection can be made throughthe Champ connector. See Figure 2-3 and refer to section 2.5 (MDF Cabling).Using one pair twisted wires, connect customer-provided paging equipment to the external paginginterface via the Champ connector on the base board.CONNECTING EXTERNAL PAGING EQUIPMENT25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTORFIGURE 7-2CHAMP CONNECTIONPIN COLOUR CIRCUITS/ FUNCTIONS NO POLARITY CONNECT EXTERNAL PAGING EQUIPMENT TOTHE INTERFACE VIA MDF DRY CONTACT MAY OPERATE WITH EXTERNALPAGING FACILITY AS SHOWN ABOVE THE CONTACT IS RATED 24VDC- 1A37/12BK-BL/ BL-BK T/R, External Page Interface36/11BK-GR/ GR-BK T/R, GP Dry Contact