Samsung DCS-816 System Administration And Special Features Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

SAMSUNG System Administration and Special Features GuideDCS-816 March 19993 - 83.9 PROGRAM PERSONAL SPEED DIAL NUMBERS FOROTHER STATIONS [MMC 105]Individual station users can program their own speed dial numbers. When necessary,however, this program allows the system administrator to view or change any station'sspeed dial numbers. The station speed dial codes are 00-49. Each station can have up to10 numbers (00-09) by default and can be assigned more in blocks of 10 (up to a maxi-mum of 50 numbers).Each speed dial number consists of a line access code and the telephone number to bedialled. The access code can be any line group, individual line, station group or individualextension. The speed dial number can be up to 32 characters long including #, FLASHand PAUSE.NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.When you are entering a speed dial number, there are some special keys that you canuse. These are the last six programmable keys of your keyset referred to as A, B, C, D, Eand F, and are defined below.PROGRAM KEYSUP & DOWN Selects a station.KEYPAD Used to enter number.HOLD Press to clear entry.A Does not have a function.B Inserts a FLASH.C Inserts a PAUSE.D Changes the dialling type from pulse to tone.E Hides and displays digits.F Toggle to MMC 106 to program speed dial nameOpen customer programming and follow the instructions below.ACTION DISPLAY1. Select 105 [201] SPEED DIAL00 :2. Dial the station number (e.g., 205)OR press UP or DOWN to select the station and press[205] SPEED DIAL00 :the right soft key to move the cursorOR press the left soft key to go to step 43. If the selected station has no speed dial blocks, thisdisplay will be shown and a new station may be[205] SPEED DIALNO SPEED BLOCKselected