Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 500 (Page 1 of 2)MMC: 500 SYSTEM-WIDE COUNTERSDCS 33 CI 33 CII 33 816 33 408i 33 408 33Used to set the values of the system counters. The counters are listed below with a brief descrip-tion of each.DIAL COUNTER DESCRIPTION0 ALARM REMINDER The number of times that an alarm reminder will ring a stationbefore cancelling. RANGE = 1–99.1 AUTO REDIAL The number of times the system will redial an outside numberafter the auto redial feature has been activated. RANGE = 1–15.2 DISA CALL Sets the maximum number of internal calls that can be madeafter accessing a DISA line. RANGE = 1–99.3 DISA LOCK Number of attempts the system will allow to incorrectly access aDISA line before locking out the DISA line. RANGE = 1–99.4 NEW CALL Number of times the system will allow a user to signal New Callon a C.O. line during one call. RANGE = 1–99.5 UCDS VISUALALARM*Used to set the Visual Alarm threshold. It is triggered when thenumber of calls waiting to be answered in the UCD groupreaches this value. RANGE = 0–25.6 UCDS AUDIOALARM*Used to set the Audio Alarm threshold. It is triggered when thenumber of calls waiting to be answered in the UCD groupreaches this value. RANGE = 0–257 UCD CS LEVEL 1* Provides call wait indication level 1 if number of calls waiting tobe answered in UCD group reaches this value. RANGE = 0–25.8 UCD CS LEVEL 2* Provides call wait indication level 2 if number of calls waiting tobe answered in UCD group reaches this value. RANGE = 0–25.* Options 5–8 are not available on 408/408i systems.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALL