Samsung DIGIMAX 350SE User Manual

Also see for DIGIMAX 350SE: User manual

Samsung DIGIMAX 350SE User Manual Manual pdf 55 page image

56SETTING UP PLAY BACK FUNCTIONSMIC / UP buttonWhen the LCD monitor is turned on, pressing the button will either cause the cursor tomove up or change a selected sub menu.When the LCD monitor is not turned on, pressing the button will allow a sound recordingto be added to a stored still picture.1. Turn the camera on.2. Rotate the mode dial to PLAY mode.3. Press the LEFT ( ) / RIGHT ( ) buttons to selectpicture that you wish to add sound to.4. Press MIC button ( ) and the sound recordingindicator will display. The camera is now ready to recordsound.5. Press the shutter button to start recording. The[RECORDING..] message will be displayed on the LCDmonitor (as shown) and sound is recorded to the stillpicture.6. The sound will record for ten seconds. Recording can bestopped by pressing the shutter button again.[ Pressing MIC button ][ Being recorded ]PLAY & PAUSE / DOWN buttonWhen the LCD monitor is turned on, pressing the button will move the cursor down orchange the sub menu.When the LCD monitor is not turned on, the button is used as the PLAY & PAUSEbutton.The PLAY & PAUSE button is used for playing and pausing a sound recorded still picture,movie clip or slide show.The PLAY & PAUSE button will only operate in single display mode.