《84》Auto Focus lamp■If you set the operation sound to ON, various sounds will be activated for camera startup,when button are pressed, and if there is a card error, so that you can be aware of the cameraoperation status.●Setting Operation Sounds1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [SOUND] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH5. Press the menu button twice and the menu will disappear.Sound●How to set up the lamp1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [AF LAMP] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [OFF] is selected : The AF lamp will not light up.If [ON] is selected : The AF lamp will light up.※ If you select [OFF] menu and take an image in poorly lit conditions or select the [NIGHT]scene mode, the camera may not take exact focus.※ The Auto Focus lamp will function while using the self-timer even if the configuration is setto off.■You can turn on and off the Auto Focus lampIMPRINTAF LAMPSOUNDOFFONSETUPBACK : SET:OKAF LAMPSOUNDLCDLOWMEDIUMHIGHSETUPBACK : SET:OK
