104Setting up the application softwareIf you have installed the camera driver, [Found New Hardware Wizard] may not open.On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opensand a window asking you to select a driver file may appear. In this case, specify "USBDriver" in the CD supplied.When connecting the camera to your PC, it is recommended that you use an AC poweradapter.Before connecting the camera to the PC, You should first install the camera driver.After installing the camera driver, you have to restart your PC.If you connect the camera to the PC before installing the camera driver, the [Found NewHardware Wizard] will open.In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Installthe camera driver and connect the camera to the PC again.Should the computer not find the camera driver after installation, please try one or more ofthe following measures.1. Delete the camera driver (p.108), and re-install the driver.2. Refer to FAQ (p.116) to check for a possible solution to the problem.3. If your PC’s central processing unit is VIA chip (This is shown in the USB HostController), download the patch file from the Samsung Camera web page.(http://www.samsungcamera.com)INFORMATION
