ŝ22ŞSelf-timer ( )/ Right button MENU/ OK buttonƈ When the menu is displayed on the LCD monitor, pressing the Right buttonmakes the cursor shift to the right tab. The right button can also be used to moveto a sub menu to select a different setting. When the menu is not displayed onthe LCD monitor, the RIGHT button operates as the Self-timer. This function isused when the photographer would also like to be in the image.ƃ In Movie Clip mode, only the 10SEC self-timer will work.ƃ When you select 2SEC self-timer with flash, the delay (2 second) can beextended according to the flash charging status.ƃ If you operate the Self-timer and Play mode button during the self-timeroperation, the self-timer function is cancelled.ƃ Use a tripod to prevent camera shake.INFORMATIONƃ Selecting the self-timer1. Press the SELF-TIMER button until the desired modeindicator displays on the LCD monitor.2. When you press the SHUTTER button, the picture willbe taken after the specified time has elapsed.[Selecting the 2 SEC self-timer]ƈ MENU button- When you press the MENU button, a menu related to each camera mode willbe displayed on the LCD monitor. Pressing it again will return the LCD to theinitial display.- A menu option can be displayed when the following are selected :MOVIE CLIP and STILL IMAGE mode.There is no menu available when the VOICE RECORDING mode is selected.ƈ OK button- When the menu is displayed on the LCD monitor, this button is used for shiftingthe cursor to the sub menu or for confirming data.Pressing the MENU button[Menu off] [Menu on]ƈ You can turn on the camera with this button. When the camera is turned on bypressing the M button, the Start image will not display and only the still imagemode will be executed.ƈ You can select the desired recording mode. The selectable recording modes aredifferent from what you selected sub menu in the [MODE] menu.- [Still / Movie / PMP] : Still image modes, Movie clip mode- [Full] : Auto, Program, Movie clip, Scene modesſ Refer to page 14, 15 for more information about the M (Mode) button.MODE SETAutoProgramMovieNightscenePortraitChildrenM (Mode) button