《3》ContentsCaution●System chart 5●Identification of features 6■Front & Top 6■Back & Bottom 7■Bottom 8■Self-timer lamp 8■Camera Status Lamp 8●Connecting to a Power Source 9■SLB-0837B rechargeable batterySpecification 9■How to charge the rechargeablebattery (SLB-0837B) 10■Charging LED of the AC Adapter 11●Inserting the memory card 11●Instructions on how to use the memory card 12●When Using the Camera for the First Time :Smart button 13●LCD monitor indicator 14●Starting the recording mode 15■How to use the AUTO mode 15■How to use the PROGRAM mode 15■How to use the Special Effect mode 16■How to use the SCENE mode 16■How to use the MOVIE CLIP mode 16■To record a movie clip without voice 17■Pausing while recording a movie clip(Successive Recording) 17■How to use the ASR (AdvancedShake Reduction) mode 17■Things to Watch Out for When TakingPictures 18●Using the camera buttons to set the camera 19■POWER button 19■Shutter button… 19■ZOOM W / T button 19■M (Mode) button 21■MENU button 21■Selecting focus type 22■Flash 22■Exposure compensation 23■White balance 24■ISO 25■Shutter Speed / Aperture Value 25■Special Effect : Photo Frame 26■Special Effect : Composite shooting 26■Special Effect : Preset focus frames 27●Using the LCD monitor to adjust thecamera settings 28■How to use the menu 29■Size 29■Quality / Frame rate 30CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury.■ Leaking, overheating, or damaged battery could result in fire or injury.•Use battery with the correct specification for the camera.•Do not short circuit, heat or dispose of battery in fire.•Do not insert the battery with the polarities reversed.■ Remove the battery when not planning to use the camera for a long period oftime. Otherwise the battery may leak corrosive electrolyte and permanentlydamage the camera’s components.■ Do not fire the flash while it is in contact with hands or objects. Do not touch theflash after using it continuously. It may cause burns.■ Do not move the camera while it is switched on, if you are using the AC Charger.After use, always switch off the camera before unplugging the cable from thewall socket. Then make sure that any connector cords or cables to other devicesare disconnected before moving the camera. Failure to do so may damage thecords or cables and cause a fire or electric shock.■ Take care not to touch the lens or lens cover to avoid taking an unclear imageand possibly causing camera malfunction.■ Avoid obstructing the lens or the flash when you capture an image.■ Before inserting any cables or AC adapter, check the directions and do not insertby force. It may cause breakage of cable or camera.■ Credit cards may be demagnetized if left near case. Avoid leaving magnetic stripcards near the case.READYRECORDING