《31》Movie Clip frame stabiliser+/ - buttonSpecial Effect : Photo Frame■ You can use the +/ - button to adjust the values for the RGB, ISO, white balanceand exposure compensation.■ This function helps stabilise images captured during movie recording.You can select this menu only in the MOVIE CLIP mode. If the memory card isnot inserted, this function will not operate.1. Press the E button in the Movie clip mode.2. Press the Left/ Right buttons to select thestabilizer menu tab.3. Select a desired sub menu by pressing the UP/DOWN button and press the OK button.- : Movie clip frame stabiliser functionbecomes disabled.- : Reduces camera shake during movie recording.The recording frame range will become narrower than when youselect the menu. Pre-view frames may not display smoothlyon the LCD monitor.Main menu Sub menu Available camera modeRGB R (Red), G (Green), B (Blue)ISO AUTO, 50, 100, 200, 400Exposure compensation -2.0 - 0.0 - + 2.0 (0.5EV steps)WHITE BALANCEAUTO, DAYLIGHT, CLOUDY,FLUORESCENT H,FLUORESCENT L, TUNGSTEN,CUSTOM.■You can add 9 types of frame-like borders to a still image you want to capture.■Date & Time information will not be printed on the stored image taken with PhotoFrame menu.1. Press the E button in the available camera modes withthe exception of Movie clip, Auto, Wide angle, Motioncapture and some scene modes and select the menu.2. Select the menu by pressing the Left/ Rightbutton.3. Select a desired sub menu by pressing the Up/Down button and press the OK button.- : The photo frame will not be added.4. The photo frame will appear.Press the shutter button to capture an imagePhoto FrameStabilizer6