Samsung DMR57LFB Installation Manual

Also see for DMR57 Series: User manual User manual User manual Installation guide Installation guide

Contents

installing the dishwasher _1102 INSTAllING The dIShWASherSTep PrePArING The dIShWASher1. Ensure that the circuit breaker and water supply valve are turned off before proceeding withthe following steps.. Ensure that the kick plate is placed on the cushion front, and make sure to keep it.. Install the 90˚ elbow at the Inlet valve. When inserting the elbow into the Inlet valve, use Teflontape or sealing compound to prevent water leakage.To prevent blocking the inlet valve, make sure that the Teflon tape or sealing compound doesnot enter the valve.. Remove the junction box cover located at the bottom right at the front of the dishwasherusing a screwdriver and then Install the strain relief. Make sure to keep the junction box coveryou removed as it is used in STEP 10.. When the countertop is made of wood or a material that is not damaged by drilling, locatethe two (2) Installation brackets that were supplied with the dishwasher. (Refer to the figuresin STEP 8.)<figure ><figure >AB CCBAJunctionboxStrain reliefKick plate