Samsung DMR78 Series Service Manual

Also see for DMR57 Series: User manual Installation guide User manual User manual Installation guide

3-233. Disassembly and Reassembly3-3. Checkpoints after Finishing a Service1 Check the safety deviceCheck the operation of the door lock switch. Make sure that it is locked while the dishwasher is running and that it isunlocked when the dishwasher stops.2. Use authenticated parts onlyIf any part is not authenticated, replace it with an authenticated part.3. Handling wiresCheck if any wires are loose or too tight, if they are connected correctly, if they are well bound with tape, and if theyare properly clamped.4. The state of screws and nutsCheck if the screws and nuts are fastened correctly.Check whether they are fastened with the specified torque.5. Remove foreign materialCheck whether any foreign material such as soil, wire scraps and screws are in the dishwasher. (Check whether anyforeign material is entering through the sump into the disposer.)6. Check for water leakageCheck whether there is water leakage from the hose connector, door, case sump (drain motor, circulation motor,heater, thermistor, turbidity sensor, distributor motor), and the water supply/drain hoses.7. Check the power cableCheck if there is any damage to the power cable or power outlet. Check that the power capacity is appropriate.8. Check levelingCheck whether the dishwasher is level.9. Check the installation locationCheck whether the installation location is flat and stable.All manuals and user guides at all-guides.com