Samsung DSB-A200C Instructions For Use Manual

Also see for DSB-A200C: Instructions for use

Contents

GB-4 D I G I T A L S A T E L L I T E R E C E I V E R GB-5GBCONNECTING YOUR “STB”7. CONNECTING DIGITAL AUDIO SYSTEMConnect a fiber optic cable between Optical SPDIF on the receiver and Optical SPDIFon the Digital Audio System.8. INSERTING COMMON INTERFACE CAM(CONDITIONAL ACCESS MODULE)AND SMARTCARDThe STB supports Common Interface CAMs under DVB specification.The CI CAMs include a built-in smart card reader.● Insert the smart card into the CAM gently with the gold colored chip upwards● Slide in the CAM gently inside the slot so that it sits in the socket tightly.● To remove the CAM push the button provided by the side of the CAM slot.The CAM will be ejected from the socket.NNoottee : The following Common Interface CAMs are available now:IRDETO, CONAX, CRYPTOWORKS, VIACCESS, NAGRAVISION, SECA, Etc.NNoottee : Selecting RGB video signal out, YUV (YPbPr) video out turns off.Selecting composite+YUV video signal out, YUV (YPbPr) video out turns on.You can set the various media settings you want.Place the cursor on this sub menu (System Setup ➔ media setting menu) and press OK.● Press the / keys to move the sub items and press the / keys to select the option.● Press the OK key to confirm. ● Press the MENU/EXIT keys to exit the menu.● Select the TV system : PAL, SECAM, NTSC, PAL ➔ (auto) NTSC, SECAM ➔(auto) NTSC, NTSC ➔ (auto) PAL, NTSC ➔ (auto) SECAM● Select the TV type according to your TV: STANDARD 4: 3 ratio or WIDE SCREEN 16 : 9 ratio type.● Select the aspect ratio conversion : Letter Box, Pan & Scan, Mixed or Full.● Select the Video Signal Type : Composite, Composite + RGB, Composite + YUV or S-Video● Select the RF Channel : Ch 21~Ch 69 ● Select Broadcasting System : B/G, I or D/KN OF THE RECEIVERr STB should be placed under proper ventilation.’t put in completely enclosed cabinet that will restrict the flow of air,lting in overheating.location should be safeguarded from direct sunlight,ss moisture, rough handling or household pets.id stacking other electronic components on the top of the receiver.location should be safely accessible by the cable from yournna system.TING THE RECEIVER WITH DISH SYSTEMr installing your antenna system, connect the coaxial cable from theof your antenna to “DISH INPUT” terminal marked at the reare STB .able connectors should be finger tightened; do not use any kindrench while tightenning connectors. The cable should be 75ohmedance coaxial twisted at the end with an “F” type connector.TING THE RECEIVER TO TVonnect the receiver with your television, you can use four methods;SCART cable, RF cable, RCA cable or Color component(Y, Pb, Pr) cable.r component(Y, Pb, Pr) provides the more faithful reproduction of the colors.nect the RF cable to the terminal marked “ RF OUT ” at the rear panelTB and its other end to the TV RF input socket.e case of connecting your TV through SCART cable, connect theRT connector marked TV to the respective SCART port on the TV.TING YOUR ANALOG RECEIVERacilitate the user using analog receiver to view analog channels,has been provided with a loop through terminal marked as “ LOOP ”.nect the coaxial cable from this terminal to the IF input terminal ofanalog receiver. Now by keeping the STB in standby,will be able to tune and view analog channels fromanalog receiver.TING YOUR VCRonnect a VCR or DVD player, the STB has been provided with SCARTe rear marked “AV2”.g a SCART connector, the VCR or DVD player can be connected to the receiver.ee : This is supported by standby.TING EXTERNAL AUDIO / HI-FI SYSTEMonnect any external Audio Hi-Fi system, the receiver has been providedtwo RCA connectors at the back of the receiver,ked with AUDIO L and R respectively to connect the left and right Audio.Connecting FigureCONNECTING YOUR "STB"2/27/04 3:22 PM Page 4