Samsung DSR 9500A Instructions For Use Manual

Also see for DSR 9500A: Instructions for use Instructions for use

Contents

GB-16 D I G I T A L S A T E L L I T E R E C E I V E RDSR 9500A FTA, CI, EM VIA, VIA CI GBGB-17 Select from Menu Mode:"User" mode : Enables control of basic positioner functionrecommended for beginners. General user uses “User” mode."Installer" mode : Complete control of the positioner’s full functionsrecommended for installers and professional users.1.2.1 User Mode Select Driving Mode:You have an option to choose the positioner’smovement type: Continuous, Step or Time. Position the antenna with north, south, eastand west and use the / , / key to drivemotor. key drives to west, key drives to east,key drives to north and key drives to south. If you finished driving of motor, select “Storecurrent Position.” and press key, to resetnew driving motor.NNoottee : The level indicated in the “Signal Status” is only for reference.The signal quality may be adequate even though the level indicated isnot maximum. Go to Stored Position.When the stored position is reached then screen displays "Stop",you can now continue with the further operations. Select the Calculate Sat Positions to recalculate the satellite position and key.g conditionsr the settingsmenu arehe "Autoyour antennaealer.iSEqC D, Tone Burst A, Tone Burst B)ion. (“Yes” or “No”)or two antennas connected to a 22KHzz tone switch ("On", "Off" or "Auto") your antennas., then you cans available.llites andFEC and Polarity.TING THE RECEIVER OPERATING THE RECEIVER