Wireless network (DV300F/DV305F only) 127About the Wake on LAN (WOL) featureSetting the PC to turn on1 Turn on the PC, and then press F2 while the PC isbooting.• The BIOS setting menu will appear.2 Select Advanced tab Power management Setup.3 Select Resume on PME Enabled.4 Press F10 to save your changes, and then continuebooting.5 Click Start, and then open the Control Panel.6 Configure the network connection.• Windows 7:Click Network and Internet Network and SharingCenter Change adapter settings.• Windows Vista:Click Network and Internet Network and SharingCenter Manage network connections.• Windows XP:Click Network and Internet Connection Network Connection.7 Select the drivers for the network adapter.8 Click the Advanced tab, and then set the WOL menus.• You cannot use this feature across a firewall or if a security program hasbeen installed.• To turn on the PC with the WOL feature, the PC must have an activeconnection to the LAN. Ensure that the indicator light on the PC’s LANport is on indicating that the LAN connection is active.• Depending on your PC model, the camera may only be able to wakethe PC.• Depending on your PC’s OS or drivers, the names of the WOL settingmenu may vary.- examples of setting menu names: Enable PME, Wake on LAN, etc.- examples of setting menu values: Enable, Magic packet, etc.
