Samsung DVD-E138A Manual

Also see for DVD-1010: User manual Manual User manual

ENGENGCHANGINGSETUP MENUAUDIO SETUPMPEG-2 Digital Out : PCMDTS : OffDynamic Compression : OnPCM Down Sampling : OnDolby Digital Out : PCMSpeaker SetupSpeaker SetupMulti Channel Output : AnalogAUDIO SETUPMPEG-2 Digital Out : PCMDTS : OffDynamic Compression : OnPCM Down Sampling : OnDolby Digital Out : PCMSpeaker SetupMulti Channel OutputMulti Channel Output :: AnalogAnalogSurround Sound Speaker Setup (DVD-P538K only)With the unit in Stop mode, press the MENU button.Select Setup using UP/DOWN buttons,then RIGHT or ENTER button.Select Audio Setup using UP/DOWN buttons,then press the RIGHT or ENTER button.Select Multi Channel Output using UP/DOWNbuttons. Then select Analog pressing the RIGHTor ENTER button.Use the UP/DOWN buttons to select Speaker Setup.Then press the RIGHT or ENTER button.Use the UP/DOWN or LEFT/RIGHT buttons to selectthe desired item. Then press the ENTER button.123456The default settings : FRONT L , R (Large), CENTER(None),SURROUND (None)Select the size of the speakers to be connected.• Front (FL , FR)- Large: Normally select this.- Small: When the sound cracks or the surround sound effects aredifficult to hear, select this. This activates the Dolby Digital bassredirection circuitry and outputs the bass frequencies of the speakerfrom the subwoofer.• Center- None: If you do not connect a center speaker, select this.- Large: Normally select this.- Small: When the sound cracks, select this. This activates the DolbyDigital bass redirection circuitry and outputs the bass frequencies ofthe center speaker from other speakers.• Surround (SL, SR)- None: If you do not connect a center speaker, select this.- Large (Rear/Side): Normally select either of these according to therear speaker’s position.- Small (Rear/Side): When the sound cracks or the surround soundeffects are difficult to hear, select either of these according to therear speaker’s position. This activates the Dolby Digital bassredirection circuitry and outputs the bass frequencies of the rearspeaker from other speakers.Setting up TESTThe test output signals come clockwise starting from the FrontSpeaker(L). Adjust Channel Balance to match to the volume of testsignals memorized in the system.50 51Setting Up the Audio OptionsWith the unit in Stop mode, press the MENU button.Select Setup using UP/DOWN buttons, then RIGHTor ENTER button.Select Audio Setup using UP/DOWN buttons, thenpress the RIGHT or ENTER button.Use the UP/DOWN buttons to select the desireditem. Then press the RIGHT or ENTER button. AUDIO SETUPMPEG-2 Digital Out : PCMDTS : OffDynamic Compression : OnPCM Down Sampling : OnMulti Channel Output : DigitalDolby Digital OutDolby Digital Out : PCM: PCMSpeaker SetupNOTE• How to make the SETUP menu disappear or return to menu screen during set up;Press RETURN or LEFT button.• Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.1234FRONT(L) CENTER SUBWOOFER FRONT(R)SURROUND(R) SURROUND(L)NOTE• How to make the SETUPmenu disappear or return tomenu screen during set up.Press RETURN or LEFT button.• The subwoofer test outputsignal is lower than the otherspeakers.• The MPEG Multichannel logois a trademark registered byPHILIPS Corporation.MPEG-2 Digital Out1. PCM :Converts to PCM(2CH) audio.Select PCM when using the AnalogAudio Outputs.2. Bitstream :Converts to MPEG-2 DigitalBitstream (5.1CH or 7.1CH).Select Bitstream when using theDigital Audio Output.Dolby Digital Out1. PCM :Converts to PCM(2CH) audio.Select PCM when using the Analog Audio Outputs.2. Bitstream :Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the Digital Audio Output.• Be sure to select the correct Digital Outputor no audio will be heard.• When Multi Channel Output select Digital.Dolby & MPEG-2 Digital Out works.DTS1. Off : Doesn’t output digital signal.2. On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.Dynamic Compression1. On : To select dynamic compression.2. Off : To select the standard range.PCM Down Sampling1. On : Select this when the amplifier connected to the player is not 96KHz compatible.In this case, the 96KHz signals will be down converted to 48KHZ.2. Off : Select this when the amplifier connected to the player is 96KHz compatible.In this case, all signals will be output without any changes.Multi Channel Output (DVD-P538K only)1. Digital : Select this when using the multichannel digital audio output.2. Analog : Select this when using the multichannel analog audio output.NOTESpeaker Setup (DVD-P538K only)AK68-00141Z-2(GB) 4/3/03 5:41 PM Page 50

/ 29

Related manuals for Samsung DVD-1010