Samsung DVD-E537K Manual

Also see for DVD-1010: User manual User manual Manual

Contents

CHANGINGSETUP MENUSetting Up the Display OptionsWith the unit in Stop mode, press the MENU button.Select Setup using UP/DOWN buttons, then RIGHTor ENTER button.Select Display Setup using UP/DOWN buttons,then press the RIGHT or ENTER button.Use the UP/DOWN buttons to select the desireditem. Then press the RIGHT or ENTER button. DISPLAY SETUPStill Mode : AutoScreen Massages : OnFront Display : Auto DimBlack Level : OffNTSC Disc Output : PAL 60 HzTV Aspect : 4:3 L - BoxTV ASPECT4:3 Pan Scan16:9 Wide4:3 Letter Box1234TV AspectStill ModeScreen MessagesFront DisplayBlack LevelNTSC Disc OutputNOTE• How to make the SETUP menu disappear or return to menu screen during set up;Press the RETURN or LEFT button.48 49AUDIO SETUPMPEG-2 Digital Out : PCMDTS : OffDynamic Compression : OnPCM Down Sampling : OnDolby Digital Out : PCMSpeaker SetupMulti Channel Output : AnalogAUDIO SETUPMPEG-2 Digital Out : PCMDTS : OffDynamic Compression : OnPCM Down Sampling : OnDolby Digital Out : PCMSpeaker SetupMulti Channel Output : AnalogSurround Sound Speaker Setup (DVD-E537K only)With the unit in Stop mode, press the MENU button.Select Setup using UP/DOWN buttons,then RIGHT or ENTER button.Select Audio Setup using UP/DOWN buttons,then press the RIGHT or ENTER button.Select Multi Channel Output using UP/DOWNbuttons. Then select Analog pressing the RIGHTor ENTER button.Use the UP/DOWN buttons to select Speaker Setup.Then press the RIGHT or ENTER button.Use the UP/DOWN or LEFT/RIGHT buttons to selectthe desired item. Then press the ENTER button.NOTE• How to make the SETUP menudisappear or return to menu screenduring set up.Press RETURN or LEFT button.• The subwoofer test output signal islower than the other speakers.• The MPEG Multichannel logo is atrademark registered by PHILIPSCorporation.123456The default settings : FRONT L , R(Large), CENTER(None),SURROUND (None)Select the size of the speakers to be connected.• Front(FL , FR)- Large: Normally select this.- Small: When the sound cracks or the surround sound effects aredifficult to hear, select this. This activates the Dolby Digital bassredirection circuitry and outputs the bass frequencies of thespeaker from the subwoofer.• Center- None: If you do not connect a center speaker, select this.- Large: Normally select this.- Small: When the sound cracks, select this. This activates theDolby Digital bass redirection circuitry and outputs the bassfrequencies of the center speaker from other speakers.• Surround (SL, SR)- None: If you do not connect a center speaker, select this.- Large (Rear/Side): Normally select either of these according tothe rear speaker’s position.- Small (Rear/Side): When the sound cracks or the surroundsound effects are difficult to hear, select either of these accordingto the rear speaker’s position. This activates the Dolby Digitalbass redirection circuitry and outputs the bass frequencies of therear speaker from other speakers.Setting up TESTThe test output signals come clockwise starting from the FrontSpeaker(L). Adjust Channel Balance to match to the volume of testsignals memorized in the system.FRONT(L) CENTER SUBWOOFER FRONT(R)SURROUND(R) SURROUND(L)