                                                                  | |
Contents
|
ENGLISH541. With the unit in Stop mode, press the SETUP button.2. Use the UP/DOWN buttons to select Audio. Then press the ENTER button.3. Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons. Digital Output1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using theDigital Audio Output.NONOTE:TE: Be sure to select the correct Digital Output or no audio will be heard.DTS1. Off : Digital signal is not output.2. On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.Dynamic Comp.(Compression)1. On : To select dynamic compression.2. Off : To select the standard range.2x Scan Audio1. Off : Turns 2X audio off. Though 2X Scan Audio is ON in the SETUP MENU, no sound will be heardon discs which are recorded with LPCM, DTS or MPEG-2 Audio.2. On : Turns 2X audio on.NONOTE:TE:• How to make the SETUP MENU disappear or return to menu screen during set up;Press RETURN button.• Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.Setting Up the Audio OptionsInstruction Use UP/DOWN to navigate the IistPress LEFT/RIGHT to change the Setting |
Related manuals for Samsung DVD-L100W
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine