ENGLISH60TroubleshootingVideo does not appear with aexternal component connected tothe DVD playerDolby Digital audio volume istoo lowBattery pack won’t chargePower does not turn onPower charge lamp doesnot light (Battery pack won’tcharge)Power charge lamp quicklyflashes Green• Check that the TV is set to VIDEO or AV.• Check that the video or audio cable is securely connected.• Change the “Dynamic Compression” setting to “On”. This will turn up the comparativelylow volume level of Dolby Digital, which provides the most wide, dynamic sound range.• Check that the DVD player is turned off.You cannot charge the battery pack with the player turned on.• A hot battery pack may take longer to charge.Wait until the battery pack is sufficiently cooled down.• Replace with a fully charged battery pack or use the AC adapter.• Replace with a fully charged battery pack or use the AC adapter.If the DVD player is overheated and the battery pack’s internal temperature goes upto a certain level, you will not be able to charge the battery pack.In this occurs, remove the battery pack. After the battery pack has sufficientlycooled down, charging will begin automatically.• Check that the temperature is within the range of 10°C~30°C.• Check that the DC cord of the AC adapter is plugged in correctly.• Remove the DC cord from the battery pack and then re-plug.If the battery pack is installed, remove the DC cord from the battery pack beforeperforming above procedure.• Recharge a different power pack. If the same symptom occurs, yourAC adapter may be defective. If the second battery pack charges without anyproblem, your first battery pack may be defective or needs battery replacement.Symptom CheckDVDBattery packoperationBattery packoperation00184P-L200W(ENG) 8/28/03 9:55 AM Page 60