Setting Up the Parental ControlThe Parental Control function works in conjunction with DVDs that have been assigned arating - which helps you control the types of DVDs that your family watches. There are upto 8 rating levels on a disc.11 With the unit in Stop mode, press SETUP button.The Setup Menu screen appears.22 Use UP/DOWN to select Parental. Press ENTER.The Parental Control screen appears.33 Use LEFT/RIGHT to select Yes if you want to usea password. Press ENTER. The Enter Passwordscreen appears.44 Enter your password. The Re-enter Passwordscreen appears to confirm the password. Enteryour password again. The Parental Controlscreen appears.55 About the Rating Level ;The Rating Level will work only when UsePassword is set to Yes. To unlock the player,use LEFT/RIGHT to select No. Use UP/DOWNto select Rating level. Press ENTER.- Use UP/DOWN to select the level(e.g. Level 6) and pressENTER. Discs that contain Level 7 will now not play.- To cancel the rating level, use LEFT/RIGHT to select No in UsePassword.66 About the Change Password ;- Use UP/DOWN to select Change Password.The Change Password screen appears.- Enter your new password. Re-enter the newpassword again.e.g Setting up in LEVEL6.NOTE• How to make the SETUP MENU disappear or return to menu screen during set up;Press RETURN button.• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.32 33Setting Up the Audio Options11 With the unit in Stop mode, press the SETUP button.22 Use the UP/DOWN buttons to select AUDIO OPTIONS.Then press the ENTER button.33 Use the UP/DOWN buttons to select the desired item.Then press the LEFT/RIGHT button.Digital Output1. PCM : Converts to PCM(2CH) 48kHz/16Bit audio.Select PCM when using the AnalogAudio Outputs.2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the DigitalAudio Output.NNNN OOOO TTTT EEEE : Be sure to select the correct Digital Output orno audio will be heard.DTS1. On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.2. Off : Doesn’t output digital signal.Dynamic Compression1. On : To select dynamic compression.2. Off : To select the standard range.2X Scan Audio1. On : Turns 2X audio on.2. Off : Turns 2X audio off.Though 2X Scan Audio is ON in the SETUP MENU,no sound will be heard on discs which are recorded withLPCM, DTS or MPEG-2 Audio.NOTE• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.• Certain audio features of this product manufactured under a license from Desper Products, Inc.Spatializer® and circle-in-square device are trademarks owned by Desper Products, Inc.• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks ofDolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rightsreserved.• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.CHANGINGSETUP MENU