44Setting Up the Audio Options11 With the unit in Stop mode, press the SETUPbutton.22 Use the UP/DOWN buttons to select AUDIOOPTIONS. Then press the ENTER button.33 Use the UP/DOWN buttons to select the desired item.Then press the LEFT/RIGHT buttons.Digital Output1. PCM : Converts to PCM(2CH) 48kHz audio.Select PCM when using the AnalogAudio Outputs.2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the DigitalAudio Output.NNN OO TT EE : Be sure to select the correct Digital Output orno audio will be heard.DTS1. Off : Doesn’t output digital signal.2. On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.Dynamic Compression1. On : To select dynamic compression.2. Off : To select the standard range.2X Scan Audio1. Off : Turns 2X audio off.Though 2X Scan Audio is ON in the SETUP MENU,no sound will be heard on discs which are recorded withLPCM, DTS or MPEG-2 Audio.2. On : Turns 2X audio on.NOTE• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.• Manufactured under license from Dolby Laboratories.”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.