Samsung Digimax 200 User Manual

Also see for Digimax 200: User manual

Samsung Digimax 200 User Manual Manual pdf 14 page image

READYConnecting to PowerThere are two ways in which to provide the camera with power.Either use batteries (AA Alkaline or Ni-MH) or, alternatively, use an AC Adaptor.Using the batteries1 Open the battery chamber cover by pushing in the direction ofthe arrow.2 Insert the batteries taking note of the polarity (+ / -).3 To close the battery chamber cover, push it until it clicks.NoteImportant information about battery usagePlease remove the batteries if the camera will not be used for long periods.Batteries can lose power over time and are prone to leak if kept inside the camera.Do not use manganese batteries as they cannot deliver sufficient power.Low temperatures (below O C) can cause the camera to work for a shorter period of time due toreduced battery performance. The batteries will recover at normal temperatures.Do not use old and new batteries or different types together.Extended use of the camera may cause the camera body to become warm.This is perfectly normal.If you are planning to use this camera for long periods of time, it is advisable to use an ACadapter.