16Connecting to a Power SourceBattery statusBattery indicatorThe batteries are fullycharged. Prepare new batteries. There is no battery capacity.Replace with new batteries.There are 3 indicators for battery condition that are displayed on the LCD monitor.3. To close the battery chamber cover, push it until it clicks.2. Insert the batteries taking note of the polarity(+ / -).1. Open the battery chamber cover by pushing in the direction of thearrow.: If the camera does not turn on after you have inserted batteries,please check whether the batteries are inserted with the correctpolarity(+ and-).Using the batteriesInserting the AA type battery Inserting the CR-V3 type batteryAlways turn off the power before taking the AC adapter out of the mains supply.As with all mains powered devices, safety is important. Ensure that neither the cameranor adapter comes into contact with water or metallic materials.Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification forthe camera. Failure to do so may affect your warranty.DANGER
