PREPARATIONSelecting the date and timeYou will need to check and select the correct Date / Time when : The camera is used for the firsttime. The batteries have been removed.The DATE / TIME will only be displayed on the LCD monitor. When you print the image, the DATE/TIME will not be printed.The DATE and TIME will be displayed on the lower end of the LCD monitor in PLAY mode.The DATE and TIME will not be displayed in SHOT(STILL IMAGE/MACRO SHOT/MOVIE CLIP)mode.1 Turn on the power by pressing the Power button.2 Set the mode dial to the SETUP mode ( ).3 The setup menu will be displayed on the LCD monitor.4 Move to [ DATE / TIME ] menu by using the DOWN button( ) on the 5-function button.5 Move to [ DATE / TIME ] sub menu by using the RIGHTbutton ( ) on the 5-function button.Selecting DATEIn step 5, select [ DATE ] by pressing UP( ) / DOWN( ) button and press OK button.Selecting TIMEIn step 5, select [ TIME ] by pressing UP( ) / DOWN( ) button and press OK button.5-function buttonDATE2002/ 01/ 01 00 : 00DATE / TIMESELECT OK SET
